manualshive.com logo in svg

Hillrom Welch Allyn Connex ProBP 3400, Руководство по обслуживанию, Страница: 59 / 64

Поделиться
Скачать
Hillrom Welch Allyn Connex ProBP 3400 Скачать руководство пользователя страница 59

Appendices

 

Clean the device

WARNING 

Electric shock hazard. Before cleaning the device, disconnect the

power cord from the power source and the device. Ensure power transformer and
wall plug assembly are dry before plugging into an outlet.

WARNING 

Take care to prevent water or other fluid from entering any connectors

on the device, power transformer, and wall plug. Should this occur, dry the
connectors with warm air. Check the accuracy of all operating functions.

CAUTION 

The device is not heat-resistant. Do not autoclave.

The following agents are compatible with the device:

•

70 percent isopropyl alcohol

•

10 percent chlorine bleach/90 percent water solution

NOTE 

Clean the device on a routine basis, according to your facility's protocols

and standards or local regulations.

70 percent isopropyl alcohol

Wipe the device with a clean cloth slightly dampened with 70 percent isopropyl alcohol.

55

Содержание Welch Allyn Connex ProBP 3400

































































Отзывы:

Нет отзывов