Hill-Rom WatchCare Series Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 74

Hill-Rom WatchCare Series Скачать руководство пользователя страница 22

WatchCare™ Incontinence Management System User and Service Manual (196414 REV 2)
16

Cleaning and Disinfecting

b.

Adjust the mattress position as necessary to get access to the
antennas. Refer to the bed’s service manual.

STEP 1: Cleaning

a.

As necessary, first remove visible soil from the reader, indicator
light, and antennas using a wiping cloth soaked with an
approved cleaner/disinfectant (see “Table 1: Approved
Cleaners/Disinfectants” on page 15).

•

A soft bristle brush may be used to loosen hardened soil.

•

Use as many wiping cloths as needed to remove the soil.

It is important to remove all visible soil from all areas before
continuing to remove non-visible soil.

b.

With a new wiping cloth soaked in an approved
cleaner/disinfectant, use firm pressure to wipe all surfaces of the
reader, indicator light, and antennas. Use a new or clean wiping
cloth as often as necessary. Make sure the following areas are
cleaned:

•

Seams around the antennas

•

Progressa® or VersaCare® Bed

—seam around the reader

Centrella® Bed

Progressa® Bed

VersaCare® Bed

DRAFT 26-FEB-2019

«
...
20
21
22
23
24
...
»

Содержание WatchCare Series











































































Отзывы:

Нет отзывов