Hill-Rom WatchCare Series Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 74

Hill-Rom WatchCare Series Скачать руководство пользователя страница 7

WatchCare™ Incontinence Management System User and Service Manual (196414 REV 2)

1

Intended Use

INTENDED USE

The Incontinence Monitor is intended to detect and provide a timely alert
when the patient’s skin is exposed to incontinence (both urine and liquid
fecal events).

INTRODUCTION

The WatchCare™ Incontinence Management System (system) provides a
discreet visual alert and optional equipment call alerts after moisture is
detected on the WatchCare™ smart pad.

This system is designed to discreetly alert the caregiver of an incontinence
event and in doing so, may prevent prolonged exposure to moisture
against the skin.

This system is most applicable in the critical care and medical/surgical
settings, but it may be used in other clinical areas as well.

Before you operate the system, make sure that you read and understand
in detail the contents of this manual. It is important that you read and
obey the aspects of the safety content in this manual.

Any reference to a side of the bed is from the patient’s view lying in the
bed on his or her back.

The system has been designed and tested for compatibility with the
hospital beds shown below and their compatible Hill-Rom® mattresses. To
determine if the system can be used on a hospital bed not listed, contact
Hill-Rom.

•

The Centrella® Smart+ Hospital Bed

•

The Progressa® Hospital Bed

•

The VersaCare® Hospital Bed

NOTE:

The system is installed by Hill-Rom representatives to receive its power
from the bed.

DRAFT 26-FEB-2019

«
...
5
6
7
8
9
...
»

Содержание WatchCare Series











































































Отзывы:

Нет отзывов