Hill-Rom WatchCare Series Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 74

Hill-Rom WatchCare Series Скачать руководство пользователя страница 46

WatchCare™ Incontinence Management System User and Service Manual (196414 REV 2)
40

1.3 Indicator Light Assembly Replacement

8.

Install the P.C. board in the
reader.

WARNING:

Warning

—Failure to correctly align the gaskets on the covers of the

reader could permit fluids to get into the enclosure. Injury or equipment
damage could occur.

9.

Install the back cover on to the
reader.

Make sure the gasket

inserts are correctly aligned.

10. Install the six screws to attach the back cover to the reader.

11. Remove any tape residue from the back cover of the reader.

12. Use the alcohol-based cleaner to clean the back cover of the reader

and the area where the reader was installed on the bed. Let the back
cover and area dry.

13. Remove one side of the adhesive covering from the double-sided

tape gasket, and install the gasket on to the back cover.

14. Remove the adhesive covering

from the other side of the gasket,
and install the reader on the bed
so that its label is toward the
outside of the bed.

Firmly press the reader into position for 10 seconds with
approximately 75 lb (34 kg) of force.

DRAFT 26-FEB-2019

«
...
44
45
46
47
48
...
»

Содержание WatchCare Series











































































Отзывы:

Нет отзывов