Hill-Rom WatchCare Series Скачать руководство пользователя страница 41

Страница: 41 / 74

WatchCare™ Incontinence Management System User and Service Manual (196414 REV 2)

1.3 Indicator Light Assembly Replacement

VersaCare® Bed

CAUTION:

Caution

—The foot section of the bed must be extended for the cable

routing. Otherwise, equipment damage could occur.

Extend the foot section.

Follow the routing of the old light assembly cable to the reader, and
then use the same routing for the

new

light assembly cable. Remove

and install cable ties as necessary.

NOTE:

You will need to remove the plug from the foot end of the sliding foot
tube and remove the screw and end cap from the fixed foot section to get
access to the cable routing.

Go to “Final Steps” on page 39.

Progressa® Bed

Fully retract the foot section.

Determine which version of the foot-end cover, with holes or without
holes, is on your bed (see below).

With Holes

Without Holes

Go to the section for your foot-end cover:

•

“Foot-End Cover With Holes” on page 36

•

“Foot-End Cover without Holes” on page 37

DRAFT 26-FEB-2019

Содержание WatchCare Series











































































Результаты поиска

Содержание WatchCare Series

Отзывы:

Hill-Rom WatchCare Series, Руководство пользователя и обслуживания, Страница: 41 / 74

Результаты поиска

Содержание WatchCare Series

Отзывы: