Hill-Rom WatchCare Series Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 74

Hill-Rom WatchCare Series Скачать руководство пользователя страница 67

WatchCare™ Incontinence Management System User and Service Manual (196414 REV 2)

61

Specifications

Encryption Options

•

Off

•

On

•

Auto

•

PSK

•

WPA-TKIP

•

WPA2-PSK

•

WPA2-AES

•

CCKM-TKIP

•

CCKM-AES

•

WPA-PSK-AES

•

WPA-AES

Extensible Authentication Protocol Types (EAP Types)

•

EAP-FAST

•

PEAP-MACHAPv2

•

EAP-TLS

•

PEAP-TLS

•

EAP-TTLS

•

LEAP

•

PEAP-GTC

Regulatory Information

WARNING:

Warning

—Changes and/or modifications not expressly approved by Hill-

Rom, Inc. could void the user’s authority to operate the equipment.
Patient safety could be compromised.

The module must be installed and used in accordance with the Hill-Rom
use and installation instructions. Hill-Rom is not responsible for any radio
or television interference caused by unauthorized modification of the
devices included with the Hill-Rom module, or the substitution or
attachment of connection cables and equipment other than that specified
by Hill-Rom, Inc. The correction of interference caused by such
unauthorized modification, substitution, or attachment is the
responsibility of the user. Hill-Rom is not liable for any damage or violation
of government regulations that may arise from the user failing to comply
with these requirements.

DRAFT 26-FEB-2019

«
...
65
66
67
68
69
...
»

Содержание WatchCare Series











































































Отзывы:

Нет отзывов