Hill-Rom WatchCare Series Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 74

Hill-Rom WatchCare Series Скачать руководство пользователя страница 13

WatchCare™ Incontinence Management System User and Service Manual (196414 REV 2)

7

Quick View™ List of Features

B

WatchCare™ Antennas

There are four WatchCare™ antennas (antenna(s)) located under
the mattress. They identify that a smart pad is present and send
a signal to the WatchCare™ reader.

C

WatchCare™ Reader

The WatchCare™ RFID reader (reader) is located on the left side
of the bed near the seat section. The RFID reader sends a signal
prompting the WatchCare™ indicator light as to the smart pad’s
status.

D

WatchCare™ Indicator Light

The WatchCare™ indicator light (indicator light) is located on the
foot end of the bed. The indicator has multi-color (green, amber,
and white) lights that indicate the system status as identified in
the table that follows.

E

WatchCare™ Communication

•

Progressa® and VersaCare® Beds—

for the WatchCare™

System to send customizable incontinence alerts to
caregivers through the facility’s nurse call system, connect
the WatchCare™ 1/4" communication cable to the
WatchCare™ connector (under the head end of the bed, on
the patient’s left) and to the facility’s equipment call jack
designated for the WatchCare™ System.

•

Centrella® Bed

—for the WatchCare™ System to send

customizable incontinence alerts to caregivers through the
facility’s nurse call system, do one of these as applicable:

Centrella® Bed with the NaviCare® System

—connect the

SideCom® cable to the bed and to the facility’s equipment
call jack.

Item

Description

DRAFT 26-FEB-2019

«
...
11
12
13
14
15
...
»

Содержание WatchCare Series











































































Отзывы:

Нет отзывов