Manual Time Synchronization
After you enable Manual Time Synchronization, you can manually set the device time.
If you check Synchronize with Computer Time, the Set Time will display the current computer's
time. At this time, uncheck Synchronize with Computer Time, and click , you can edit the
device time manually.
Click Save to save the settings.
DST
On the Device for Management page, click Remote Configuration → System → Time → DST to
enter the DST tab.
Enable DST and you can edit the DST bias time, the DST start time, and end time.
Click Save.
9.4 System Maintenance
You can reboot the device, restore the device to the default settings, and upgrade the device.
Reboot
On the Device for Management page, click → System → System Maintenance to enter the
System Maintenance tab.
Click Reboot and the device starts rebooting.
Restore Default Settings
On the Device for Management page, click Remote Configuration → System → System
Maintenance to enter the System Maintenance tab.
Restore Default
The parameters will be restored the default ones, excluding the IP address.
Restore All
All device parameters will be restored to the default ones. The device should be activated after
restoring.
Upgrade
On the Device for Management page, click Remote Configuration → System → System
Maintenance to enter the System Maintenance tab.
Select a device type from the drop-down list, click Browse and select an upgrade file from the local
computer, and click Upgrade.
DS-K1T804B Series Fingerprint Access Control Terminal User Manual
122
