HIKVISION DS-K1T105 Series Скачать руководство пользователя

Страница: 93 / 99

Access Control Terminal

User Manual

7.5

System Maintenance

7.5.1

Log Management

Interface Introduction

Purpose:

The log files of the Access Control System and the devices that connected to the Access Control System can be searched for
checking.

Click the

icon on the control panel to open the Log Search page.

Configuration Logs Searching

Purpose:

The Configuration Log files of the Access Control System can be searched by time, including One-Card Configuration, Access Control
Configuration, Downloading Permission and System Configuration.

Steps:

Open the Log Search page.

Select the radio button of Configuration Logs.

Select the Operation Type of log files.

Click the icon

to specify the start time and end time.

Click Search. The matched log files will display on the list.
You can check the operation time, log type and other information of the logs.

Note:

Please narrow the search condition if there are too many log files.

Control Logs Searching

Purpose:

The Control Log files of the Access Control System can be searched by time, including Access Control and Log Search.

Steps:

Open the Log Search page.

Select the radio button of Control Logs.

Select the Operation Type of log files.

Click the icon

to specify the start time and end time.

Click Search. The matched log files will display on the list.
You can check the operation time, log type and other information of the logs.

Note:

Please narrow the search condition if there are too many log files.

Searching Configuration Log

Searching One-card Configuration Logs

Purpose:

Содержание DS-K1T105 Series




































































































Результаты поиска

Содержание DS-K1T105 Series

Отзывы:

Похожие инструкции для DS-K1T105 Series

Бренды по названию

Популярные бренды

HIKVISION DS-K1T105 Series, Руководство пользователя

Результаты поиска

Содержание DS-K1T105 Series

Отзывы:

Похожие инструкции для DS-K1T105 Series

Бренды по названию

Популярные бренды