HIKVISION DS-K1T105 Series, Руководство пользователя

Страница: 62 / 99

Access Control Terminal
·
User Manual
58
Reader Buzzer: The audible warning of card reader will be triggered.
Alarm Output: The alarm output will be triggered for notification.
Door: The door status of open, close, normally open, and normally close will be triggered.
7. Click the button to save parameters.
8. Click the Apply button to download the updated parameters to the local memory of the device.
Note:
The door status of open, close, normally open, and normally close cannot be triggered at the same time.
7.3.6 Access Permission Configuration
Click the icon on the control panel to enter the interface.
Access Permission Settings
Purpose:
You can allocate permission for people/department to enter/exist the control points (doors) in this section.
Steps:
1. Enter the Permission page.
2. Click on icon on the upper-left side of the page to enter the Add Permission page.
3. Select an adding type in the Select Type interface.

By Person: you can select people from the list to enter/exit the door.

By Department: You can select departments from the list to enter/exit the door. Once the permission is allocated, all
the people in this department will have the permission to access the door.

By Access Control Point: You can select doors from the door list for people to enter/exit.

By Door Group: You can select groups from the door list for people to enter/exit. The permission will take effect on
the door in this group.
4. Click Next to enter the Permission Settings interface.