HIKVISION DS-K1T105 Series, Руководство пользователя

Страница: 46 / 99

Access Control Terminal
·
User Manual
42
And then click the OK button in the popup window.
Access Control Point Management
Access control points under the group can also be edited, refer to the following instructions.

Importing Access Control Point
Steps:
1. Click the button to pop up the access control point importing interface.
2. Select an access control point to import by clicking it.
3. Click to select a group in the right side bar to import to.
4. Click button to import the selected access control points or click to import all the
available access control points.
Notes:

You can click button on the upper-right corner of the window to create a new group.

The control client can manage 100 access control points at most.

Editing Access Control Point
Steps:
1. Click to select an access control point in the list and click the button to edit the access control point.
2. Edit the Door Name and Position.
3. Click button to finish editing.
Note: You can also enter the Edit interface by double clicking the door from the list.

Deleting Access Control Point
Several ways are supported to delete the access control point, as shown below.

Click to select a group in the group list, select door(s) under it, and click button.

Click to select a group in the group list, and click button to delete all access control points under the group.

Move the mouse onto a group in the group list, and click button to delete all access control points under the group.
Note: You can also edit/delete a door on the Import Access Control Point panel.
Steps:
1. Select a control point on the Group panel.
2. Click the / icon to enter the Edit Access Control Point panel or to delete the control point.
7.3 Permission Management
7.3.1 Person Management
Interface Introduction
Click the icon on the control panel of the software.
Adding, editing, deleting and filtering of the department and person are supported in this interface.