HIKVISION DS-K1T105 Series Скачать руководство пользователя

Страница: 29 / 99

Access Control Terminal

User Manual

Figure 6-15

Serial Port Settings Interface

Modify parameters of the serial port, including working mode, Baud Rate, and RS-485 address.

Working Mode:

When the access control terminal works as the terminal, you can connect it to Card Reader, Client Software and

Control Unit.

Notes:



Set the working mode of the serial port as

Connect to Card Reader

if the access control terminal is connected to the

external card reader.



If the terminal is worked as the card reader, Working Mode cannot be used.

Baud Rate:

It will display the Baud Rate configured on the client software.

RS-485 Address:

When the access control terminal works as a card reader, the RS-485 address should be configured.

Notes:



Tap the

key to enter and exit the editing mode.



Tap the Right/Left direction keys to choose contents.



Tap the

key to switch the mode between “Yes” mode and “No” mode.

Move the cursor to the

button, and tap the

key.

Note:

Reboot the device after changing the working mode.

6.2.3

Wiegand Settings

Purpose:

When the access control terminal works as the Wiegand card reader, you should set Wiegand parameters.

Steps:

Move the cursor to

Wiegand

(Wiegand settings) by using direction keys on the communication settings interface.

Tap the

key to enter the Wiegand settings interface.

Figure 6-16

Wiegand Settings Interface

Edit parameters of the serial port, including the Wiegand direction, and the Wiegand mode.

Wiegand Direction:

In the terminal mode, select whether to

Receive

or to

Send

. In the

Receive

mode, the mode cannot be changed.

In the card reader mode, only

Send

is supported.

Wiegand Mode:

The default Wiegand mode is Wigand 34.

Notes:



Tap the

key to enter and exit the editing mode.



Tap the Right/Left direction keys to choose contents.



Tap the

key to switch the mode between “Yes” mode and “No” mode.

Содержание DS-K1T105 Series




































































































Результаты поиска

Содержание DS-K1T105 Series

Отзывы:

Похожие инструкции для DS-K1T105 Series

Бренды по названию

Популярные бренды

HIKVISION DS-K1T105 Series, Руководство пользователя

Результаты поиска

Содержание DS-K1T105 Series

Отзывы:

Похожие инструкции для DS-K1T105 Series

Бренды по названию

Популярные бренды