HIKVISION DS-K1T105 Series Скачать руководство пользователя

Страница: 33 / 99

Access Control Terminal

User Manual

6.3.4

Door Settings

Purpose:

On the door settings interface, you can set door parameters, including

Controller Authentication, Card Reader Authentication, Door

Action Time, Delayed Door Alarm, and Anti-passing Back.

Steps:

Move the cursor to

ACS

(door settings) by using direction keys in the system settings interface.

Tap the

key to enter the door settings interface.

Figure 6-24

Door Settings Interface

Edit door parameters.

Controller Authentication:

Set the controller authentication mode for opening the door, that is, Card Only, Fingerprint Only,

Card/Fingerprint, Card & Fingerprint, Card & Password, Fingerprint & Password, Card & Fingerprint & Password.

Card Reader Authentication:

Set the card reader authentication mode for opening the door, that is, Card Only, Fingerprint Only,

Card/Fingerprint, Card & Fingerprint, Card & Password, Password & Fingerprint, Card & Password & Fingerprint.

Door Action Time:

Set the door action time: 1 ~ 255 s.

Delayed Door Alarm:

Set the delayed door alarm threshold: 1 ~ 255 s.

Anti-Passing Back

: Set whether to enable the function of anti-passing back.

Notes:



Tap the

key to enter and exit the editing mode.



Tap the Right/Left direction keys to choose contents.



Tap the

key to switch the mode between “Yes” mode and “No” mode.

Move the cursor to the

button, and tap the

key.

6.3.5

Setting the Camera

Purpose:

On the camera settings interface, you can set camera parameters.

Note:

This function is only supported by terminal with the model of –C.

Steps:

Move the cursor to

Camera

(camera settings) by using direction keys in the system settings Interface.

Tap the

key to enter the camera settings interface.

Figure 6-25

Camera Settings Interface

Edit camera parameters.

Enable Face Detection:

When enabling face detection, the system can detect the face.

Enable Card No. Overlay:

When enabling card No. overlay, captured pictures can be overlaid on the card information.

Содержание DS-K1T105 Series




































































































Результаты поиска

Содержание DS-K1T105 Series

Отзывы:

Похожие инструкции для DS-K1T105 Series

Бренды по названию

Популярные бренды

HIKVISION DS-K1T105 Series, Руководство пользователя

Результаты поиска

Содержание DS-K1T105 Series

Отзывы:

Похожие инструкции для DS-K1T105 Series

Бренды по названию

Популярные бренды