High End Systems High End LCD Controller for Studio Color, Руководство пользователя

Страница: 146 / 272

6-16 Remote Page Access Studio Color LCD Controller
Remote Page Access
The remote page access feature allows you to remotely play
back pages from the memory that you first select on the
controller’s front panel. (You cannot remotely select or
change memories.)
1. Connect the analog controller as described in the section
titled “Analog Inputs Ports” on page 6-15. Set switch B-3 on
the Studio Color LCD controller’s rear panel to OFF.
2. Select the memory containing the pages you want to remotely
access using the Cursor
<Up>
and
<Down>
arrow keys.
3. From the analog controller perform the applicable procedure,
a through c, to select the desired page. Table 6-1 summarizes
the channel functions.
0V = Disabled
5V-10V = Enabled
a. Channels 1 through 12 on the analog controller
correspond directly to pages 1 through 12 on the Studio
Color LCD controller.
Thus, if you enable channel 1 on the analog controller,
you call up page 1 on the Studio Color LCD controller,
channel 2 calls up page 2, and so on.
b. Simultaneously enabling any combination of two
channels on the analog controller calls up the page
number corresponding to the combination of the two
channel numbers (lowest number first). For example, if
you simultaneously enable channels 1 and 2, you call up
page 12. Enabling channels 7 and 3 calls up page 37.