Heicko ERSDC1038-02, Руководство пользователя

Страница: 40 / 44

-38-
HRSDC_ERSDC10.12_EN
9.9 Delete emitter B whilst emitter A remains active
P2 P2 P2
A A B
x1
x1
x1
x1
x1
x5
Press P2
for 1 second
Press P2
for 1 second
Press P2
for 1 second
9.11 Enable / Disable step function
Press either the "Up" or "Down" button for a short
movement (release within 2 seconds), press one of the
buttons for more than 2 seconds and the motor will start to
run continuously.
Press P2
for 1 second
P2
Press „Up“
for 1 second
Press „Down“
for 1 second
9.10 Delete emitter
Press P2
for 1 second
P2
Press „Stop“
for 1 second
P2
Press P2
for 1 second
• This function clears the connections from all emitters to the motor.
x1
x1
x1
x1
x1
x5
x1
x1
x1
x1
x1
x2
9.13 Speed regulation
Press „Stop“ and „Down“
button simultaneously for
2 seconds
x2 = medium speed
+
Reducing the rotation speed
Press „Stop“ and „Up“
button simultaneously
for 2 seconds
x2 = medium speed
+
Increasing the rotation speed
x3 = highest speed x1 = lowest speed
9.14 Resetting to factory default
x4
Note! - This function is not available when using the
controls HD05B, HD15BT, HR120033WA, HR120038G2,
HR1200-SUN-G2 and HR1300-WIND-G2!
Press P1
for 14 seconds
x4
• When delivered, the highest rotation speed is set.
9.12 Disable radio communication
When the radio link is disabled, the motor saves the previously set functions as well as the emitter code and will only lock the radio reception. When
Setting up more than one motor you can avoid interference from the other motors while programming by using this function.
x2 x2
Briefly press P1 to
enable the wireless reception.
Press P1
for 6 seconds