Heicko ERSDC1038-02, Руководство пользователя

Страница: 32 / 44

-30-
HRSDC_ERSDC10.12_EN
6.14 Disable radio communication
When the radio link is disabled, the motor saves the previously set functions as well as the emitter code and will only lock the radio reception. When
Setting up more than one motor you can avoid interference from the other motors while programming by using this function.
x2 x2
0
1
Briefly press P1 to
enable the wireless reception.
Press P1
for 6 seconds
6.16 Resetting to factory default
0
1
x4 x4
Press P1
for 14 seconds
Press „Stop“ and „Down“
button simultaneously for
2 seconds
Press „Stop“ and „Up“
button simultaneously for
2 seconds
6.15 Speed regulation
Note! - This function is not available when using the
controls HD05B, HD15BT, HR120033WA, HR120038G2,
HR1200-SUN-G2 and HR1300-WIND-G2!
x2 = medium speed
+
Reducing the rotation speed
x2 = medium speed
+
Increasing the rotation speed
x3 = highest speed x1 = lowest speed
• When delivered, the highest rotation speed is set.
0
1
7.2 Radio operation of the ERSDC1038-02 motors
P2
M
P2
3V
The operation is only possible with emitters with radio code G2. Information on which emitters have radio code G2 is available at
www.heicko.de or www.heicko-bewegt.de.
Illustrations may differ from
the items and are only for
the purpose of illustration.
7.3 Start-up
x1 x1
0
1
Switch battery
switch to „1"
0
1
Wait 10 seconds
7.1 Charging behaviour
7. Rechargeable tubular motor type ERSDC1038-02
The battery must be fully charged before first use. To conserve the battery capacity, the motor is switched to a sleep mode. Turning on
the battery switch will cancel this sleep mode.
LED status display: During charging = green flashing, fully charged = green glowing
Battery switch
0 = Off; 1 = On
Micro-USB charging socket
LED-Light
Button cell
Up
Stop
Down
Setup
button P2
Multi-function button P1