Heicko ERSDC1038-02, Руководство пользователя

Страница: 38 / 44

-36-
HRSDC_ERSDC10.12_EN
8.13 Resetting to factory default
x3
Press P1
for 10 seconds
x3
9.2 Radio operation of the HRSDC4013-14-* motors
9.1 Charging behaviour
9. Rechargeable tubular motor type HRSDC4013-14-*
The battery must be fully charged before first use. To conserve the battery capacity, the motor is switched to a sleep mode. Initial
connection to the charger will cancel this sleep mode.
LED status on charger: During charging = alternating red / green flashing, fully charged = green glowing
Charging socket,
cable 40 cm
P2
M
P2
3V
The operation is only possible with emitters with radio code G2. Information on which emitters have radio code G2 is available at
www.heicko.de or www.heicko-bewegt.de.
Illustrations may differ from
the items and are only for
the purpose of illustration.
Multi-function
button P1
Important! - Please note
• For adjusting the limit positions the motor needs to be connected to an emitter.
• Both limit positions must be set as described (coherently, in one operation).
• If a correction of the limit positions is required, please proceed as described at 9.5.3.
9.5 Adjustment of the limit positions
P2
Press P2
for 1 second
Press P2
for 1 second
Press „Up“
for 1 second
P2
Press P1
for 2 seconds
9.3 Connecting the motor to the emitter
9.4 Change of rotation direction - 2 options
P2
Press P2
for 1 second
Press P2
for 1 second
Press „Down“
for 1 second
P2
Press P1
for 2 seconds
a)
x1 x1 x1 x1 x1 x1 x6
x1 x1 x1 x1 x1 x1 x6
x3 x3
Press P1
for 10 seconds
b)
Button cell
Up
Stop
Down
Setup
button P2