Heicko ERSDC1038-02, Руководство пользователя

Страница: 27 / 44

Important! - Please note
• For adjusting the limit positions the motor needs to be connected to an emitter.
• Both limit positions must be set as described (coherently, in one operation).
• If a correction of the limit positions is required, please proceed as described at 5.5.3.
5.5 Adjustment of the limit positions
5.5.1 Limit setting mode
P2
Press P2
for 1 second
P2
Press P2
for 1 second
Press „Up“
for 1 second
x1 x1 x1
5.4 Change of rotation direction - 2 options
P2
Press P2
for 1 second
Press P2
for 1 second
Press „Down“
for 1 second
x1
x1
P2
Press P1
for 2 seconds
x1
x1
Press P2
for 10 second
x3
b)
a)
-25-
HRSDC_ERSDC10.12_EN
5.5.3 Correcting existing limit positions
Press "Up" and
"Down" for 5
seconds
+
To change the existing limit position, the hanging must be at the respective limit position.
x1
Adjustment of the limit positions
press for at least 2 seconds for a
continuous movement
oder
Press „Stop“
for 5 seconds
x1 x5 Note! - This function is not
available when using the
controls HD05B, HD15BT,
HR120033WA, HR120038G2,
HR1200-SUN-G2 and
HR1300-WIND-G2!
Move to your
desired position
Press „Stop“
for 1 second Move to your
desired position
5.5.2 Setting of the upper and lower limit position of motor type ERSDC2803-35
Press „Up“
for 1 second
Press „Stop“
for 5 seconds
x1
Press „Down“
for 1 second
Press „Stop“
for 1 second Press „Stop“
for 5 seconds
x1
If you are in the limit setting mode and no command is given within 2 minutes, the motor
will automatically exit the mode.
The hanging can be moved to the previously set limit position by pressing the P1 multi-
function button. Pressing it again will stop the motor.
5.6 Setup / Delete intermediate stop function
Move to your
desired position
P2
To get to the intermediate
position please press the
"Stop" button for 2 seconds.
x1 x1 x1
Press „Stop“
for 1 second Press „Stop“
for 1 second
Press P2
for 1 second
Press „Stop“
for 1 second
Important! - To set the intermediate stop function, the limit positions must be already set.