Heicko ERSDC1038-02, Руководство пользователя

Страница: 39 / 44

-37-
HRSDC_ERSDC10.12_EN
9.5.1 Limit setting mode
P2
Press P2
for 1 second
P2
Press P2
for 1 second
Press „Up“
for 1 second
x1 x1 x4 x1 x1 x1
x1 x5
Move to your
desired position
Press „Stop“
for 1 second Move to your
desired position
9.5.2 Setting of the upper and lower limit position of motor type HRSDC4013-14-*
Press „Up“
for 1 second
Press „Stop“
for 5 seconds
Press „Down“
for 1 second
Press „Stop“
for 1 second Press „Stop“
for 5 seconds
If you are in the limit setting mode and no command is given within 2 minutes,
the motor will automatically exit the mode.
9.6 Setup / Delete intermediate stop function
x1 x5
9.5.3 Correcting existing limit positions
Press "Up" and
"Down" for 5
seconds
+
To change the existing limit position, the hanging must be at the respective limit position.
x1 x4
Adjustment of the limit positions
press for at least 2 seconds for a
continuous movement
or
Press „Stop“
for 5 seconds
x1 x5
Note! - This function is not
available when using the
controls HD05B, HD15BT,
HR120033WA, HR120038G2,
HR1200-SUN-G2 and
HR1300-WIND-G2!
x1
x1
9.7 Deleting of the limit positions
P2 P2
• When using the function, the blind can be in any position.
• This function deletes both limit positions.
Press P2
for 1 second
Press „Down“
for 1 second
Press P2
for 1 second
x1
x1
x1
x4
9.8 Add an emitter (Copy from emitter A to emitter B)
Press P2
for 1 second
P2
Press P2
for 1 second
P2
Press P2
for 1 second
P2
A A B
x1 x1 x1 x1 x1 x7
Move to your
desired position
P2
To get to the intermediate
position please press the
"Stop" button for 2 seconds.
Press „Stop“
for 1 second Press „Stop“
for 1 second
Press P2
for 1 second
Press „Stop“
for 1 second
Important! - To set the intermediate stop function, the limit positions must be already set.
x1 x3 x1 x1 x1 x1