Heicko ERSDC1038-02, Руководство пользователя

Страница: 35 / 44

-33-
HRSDC_ERSDC10.12_EN
7.14 Disable radio communication
When the radio link is disabled, the motor saves the previously set functions as well as the emitter code and will only lock the radio reception. When
Setting up more than one motor you can avoid interference from the other motors while programming by using this function.
7.13 Enable / Disable step function
Press either the "Up" or "Down" button for a short
movement (release within 2 seconds), press one of the
buttons for more than 2 seconds and the motor will start to
run continuously.
Press P2
for 1 second
P2
Press „Up“
for 1 second
Press „Down“
for 1 second
x1
x1
x1
x1
x1
x2
x2 x2
0
1
Briefly press P1 to
enable the wireless reception.
Press P1
for 6 seconds
Press P1
for 14 seconds
7.15 Resetting to factory default
0
1
x4 x4
Charging socket
8.2 Radio operation of the ERSDC1040-06 motors
P2
M
P2
3V
The operation is only possible with emitters with radio code G2. Information on which emitters have radio code G2 is available at
www.heicko.de or www.heicko-bewegt.de.
Illustrations may differ from
the items and are only for
the purpose of illustration.
P2
Press P2
for 1 second
Press P2
for 1 second
Press „Up“
for 1 second
P2
Press P1
for 2 seconds
8.3 Connecting the motor to the emitter
x1 x1 x1 x1 x1 x1 x6
8.1 Charging behaviour
8. Rechargeable tubular motor type ERSDC1040-06
The battery must be fully charged before first use. To conserve the battery capacity, the motor is switched to a sleep mode. Initial
connection to the charger will cancel this sleep mode.
LED status on charger: During charging = red glowing, fully charged = red glowing
Button cell
Up
Stop
Down
Setup
button P2
Multi-function
button P1