Heicko ERSDC1038-02, Руководство пользователя

Страница: 28 / 44

-26-
HRSDC_ERSDC10.12_EN
5.12 Disable radio communication
When the radio link is disabled, the motor saves the previously set functions as well as the emitter code and will only lock the radio reception. When
Setting up more than one motor you can avoid interference from the other motors while programming by using this function.
x2
Briefly press P1 to
enable the wireless reception.
Press P1
for 6 seconds
5.8 Add an emitter (Copy from emitter A to emitter B)
Press P2
for 1 second
P2
Press P2
for 1 second
P2
Press P2
for 1 second
P2
A A B
x1 x1 x1
5.9 Delete emitter B whilst emitter A remains active
Press P2
for 1 second
P2
Press P2
for 1 second
P2
Press P2
for 1 second
P2
A A B
x1 x1 x1
5.7 Deleting of the limit positions
Press P2
for 1 second
P2
Press „Down“
for 1 second
x1
P2
Press P2
for 1 second
x1 x1
• When using the function, the blind can be in any position.
• This function deletes both limit positions.
5.11 Enable / Disable step function
x1 x1 x1
Press either the "Up" or "Down" button for a short
movement (release within 2 seconds), press one of the
buttons for more than 2 seconds and the motor will start to
run continuously.
Press P2
for 1 second
P2
Press „Up“
for 1 second
Press „Down“
for 1 second
5.10 Delete emitter
Press P2
for 1 second
P2
Press „Stop“
for 1 second
x1
P2
Press P2
for 1 second
x1 x1
• This function clears the connections from all emitters to the motor.