Hatz 3H50 Series, Руководство пользователя

Страница: 8 / 132

Safety 3H50, 4H50
8 HATZ Manual
▪ Installation of the machine in mobile equipment (e.g. vehicles, trailers) or
in closed rooms without additional measures to handle supply air, extract
air, and exhaust gas.
▪ Improper operation at variance with DIN 6271 and DIN ISO 8528 (climate,
load, safety).
Residual risks
Residual risks result during daily use and in association with maintenance
work.
These residual risks will be pointed out in chapter 3.2.2 Machine-specific
safety instructions for operation, page 15 and in chapter 3.2.3 Machine-
specific safety instructions for maintenance work, page 16 as well as in the
further contents of the manual, directly in front of the descriptions or operat-
ing instructions concerned.
3.1.2 Machine user or machine manufacturer obligations
Machine manufacturer obligations
If you have an engine that is not yet installed in a machine, it is imperative
that you follow the
Assembly Instructions for HATZ Diesel Engines be-
fore installing the engine. These assembly instructions contain important in-
formation on how to safely install the engine and are available at your near-
est
HATZ service station .
It is prohibited to start the engine before it is fully installed.
In addition, please note that it is prohibited to start up the machine before it
has been determined that the machine into which this engine is installed ful-
fills all safety-related requirements and legal regulations.
User obligations
The operator is obliged to only operate the machine when it is in perfect con-
dition. The operator must check the condition of the machine before use and
ensure that any defects are eliminated before it is taken into service. Run-
ning the machine while identified defects exist is not permitted. The user
must also ensure that all persons who work on the machine are familiar with
the contents of this manual.
Obligations of the operating and maintenance personnel
Personnel assigned with operating and maintaining the machine must have
read and understood this manual or must possess the qualifications neces-
sary for working with this equipment, acquired in training/instructional cour-
ses. No one may work with the machine without the necessary qualifications,
even if for just a brief period.
The operating and maintenance personnel must not be under the influence
of drugs, medication or alcohol.
All work performed on the machine must be in compliance with the informa-
tion provided in this manual.