Hatz 3H50 Series, Руководство пользователя

Страница: 92 / 132

Maintenance 3H50, 4H50
92 HATZ Manual
Step Activity
3 Fill with engine oil.
For the specification and viscosity, see section
4.3 Engine oil,
page 25 .
For the filling quantity, see section 4.1 Engine information and
filling quantities, page 21 .
4 Reinsert the dipstick.
5 Pull out the dipstick and check the oil level.
6 If required, add engine oil to the max. mark.
7 Reinsert the dipstick.
8 Screw in the oil filler plug.
Concluding the inspection work
Step Activity
1 Check the oil level after a short test run and correct if necessary.
2 Check the oil filter for tightness and retighten by hand if neces-
sary.
8.2.7 Engine cleaning
Safety notes
DANGER
Danger of explosion from flammable cleaning agents.
Cleaning with benzene is an explosion hazard. It is highly
flammable, can become electrostatically charged, and can gen-
erate an explosive gas/air mixture.
▪ Use halogen-free, cold cleaners with a high flashpoint for
cleaning.
▪ Comply with manufacturer's instructions.
CAUTION
Danger of environmental pollution due to oil and cleaning
agents.
Oil and cleaning agents are hazardous to the environment.
▪ Do no allow them to enter the ground water, water bodies,
or sewage system.
▪ Only clean the machine at the washing area intended for
this.