Hatz 3H50 Series страница 103 Скачать руководство пользователя

Страница: 103 / 132

3H50, 4H50

Maintenance

HATZ

103

Manual

Step

Activity

Check the pulley, belt tensioner and pulley for perfect condition.
If the grooves are broken off or bent, renew the damaged pulley.

Feed a new poly v belt over the fan blade in the same way from
the radiator side.

Place the poly v belts on all pulleys, except the belt tensioners.
Monitor the belt run.

Turn the belt tensioner in the direction of the arrow and lay on
the poly v belt.

Slowly relieve the belt tensioner.

Check that the poly v belt is correctly placed on the pulley.

Reassemble the protective guard and belt protection again.

8.2.10 Changing the oil separator of the crankcase ventilation

Safety note

CAUTION

Danger of burns.

There is a danger of burns when working on a hot engine.

▪

Let the engine cool before maintenance.

Overview

Mounting bolts (captive)

Breather cap

Oil separator cartridge

Vent hose

Содержание 3H50 Series





































































































































Результаты поиска

Содержание 3H50 Series

Отзывы:

Похожие инструкции для 3H50 Series

Бренды по названию

Популярные бренды

Hatz 3H50 Series, Руководство пользователя

Результаты поиска

Содержание 3H50 Series

Отзывы:

Похожие инструкции для 3H50 Series

Бренды по названию

Популярные бренды