Hatz 3H50 Series, Руководство пользователя

Страница: 89 / 132

3H50, 4H50 Maintenance
HATZ 89 Manual
Step Activity
3 Dispose of the old filter in accordance with local environmental
regulations.
4 Thoroughly clean the shaped element (3) and sealing surface
(4).
5 Lightly oil the sealing lip (5) of the new oil filter.
6 Screw in the oil filter and tighten it by hand .
7 Make sure that the guard ring (6) seats fully on the shaped ele-
ment (3). The guard ring prevents dirt from accumulating be-
tween the oil filter and shaped element.
Draining the engine oil
Overview – Model with oil drain screw
1 Oil drain screw (side)
2 Oil drain screw (front)
3 Gasket
Procedure
Step Activity
1 Keep a container ready for collecting the used oil. The container
must be large enough to hold the entire amount of engine oil.
For the engine oil filling quantity, see section
4.1 Engine infor-
mation and filling quantities, page 21 .
2 Depending on accessibility, the engine oil can be drained at oil
drain screw (1) or (2).
Unscrew the oil drain screw and drain the used oil entirely.
3 Screw in the cleaned oil drain screw with the new gasket (3) and
tighten. Tightening torque: 50 Nm.