Hatz 3H50 Series Скачать руководство пользователя

Страница: 73 / 132

3H50, 4H50

Maintenance

HATZ

Manual

Maintenance

8.1

General maintenance instructions

Safety notes

WARNING

Danger of injury from failure to follow the operating instruc-
tions and from performing unauthorized tasks on the ma-
chine.

▪

Follow all instructions.

▪

Do not perform activities for which no qualification is avail-
able. Contact properly trained personnel if necessary.

NOTICE

Comply with the safety chapter!

Follow the basic safety instructions in chapter

3 Safety, page 7

▪ Maintenance tasks may only be performed by trained personnel.

▪ Accident prevention measures must be in accordance with the local acci-

dent prevention regulations.

▪ Perform setting and maintenance work at the specified intervals.

▪ Replace faulty machine parts as soon as possible.

▪ Always wear personal protection equipment.

▪ Only use fully functional tools.

▪ Installation of unsuitable spare parts can lead to problems. We cannot ac-

cept responsibility for direct damage or secondary damage that results
from this.We therefore recommend the use of

Hatz original spare parts

▪ Closely adhere to the maintenance conditions prescribed in this manual.

▪ Only make changes to the machine in agreement with the manufacturer.

▪ Only perform maintenance work when the engine is stopped.

▪ Protect the starting key from unauthorized access.

▪ Disconnect the negative battery terminal before carrying out maintenance

work.

▪ Adhere to legal regulations when handling and disposing of used oil, fil-

ters, coolants, and cleaning agents.

▪ After completing maintenance work, check that all tools, bolts, aids, and

other objects are removed from the machine, and that all safety equipment
has been replaced.

Содержание 3H50 Series





































































































































Результаты поиска

Содержание 3H50 Series

Отзывы:

Похожие инструкции для 3H50 Series

Бренды по названию

Популярные бренды

Hatz 3H50 Series, Руководство пользователя

Результаты поиска

Содержание 3H50 Series

Отзывы:

Похожие инструкции для 3H50 Series

Бренды по названию

Популярные бренды