manualshive.com logo in svg

Hatz 3H50 Series, Руководство пользователя

Поделиться
Скачать
Hatz 3H50 Series Скачать руководство пользователя страница 26

Technical data

3H50, 4H50

26

HATZ

Manual

CAUTION

Engine damage from unsuitable engine oil.

Unsuitable engine oil considerably reduces engine service life. 
Only use engine oil that fulfills the specifications stipulated
above.

4.4

Coolant

Introduction

Liquid-cooled engines require a coolant specified by HATZ for engine cool-
ing.
Coolant is prepared in accordance with manufacturer's instructions, please
comply with the information on the packaging label.

Radiator protection fluids give effective protection against corrosion and
freezing. In addition, the coolant boiling point is significantly raised and de-
posits of lime in the cooling system are reduced.

Safety notes

CAUTION

Danger of damage to health

Radiator protection fluids are harmful to health.

▪

Avoid contact to eyes and skin.

▪

Store only in the sealed original container and in a place in-
accessible for unauthorized persons.

▪

Comply with manufacturer's instructions.

CAUTION

Danger of environmental damage from spilled coolant.

Coolant is water-polluting.

▪

Do not allow it to enter the ground water, water bodies, or
sewage system.

▪

Collect the coolant and dispose of it according to local envi-
ronmental regulations.

CAUTION

Danger of engine damage from radiator protection fluid.

Use of a radiator protection fluid not approved by HATZ can
cause engine damage.

▪

If you have any questions, please contact your nearest

HATZ Service

 before commissioning the engine.

Содержание 3H50 Series





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды