56 |
P a g e
Step 5
(if cells/ml selected)
Enter the factor using the keypad numbers. Range
0.00 to 9999. Use the C button to clear the last
digit entered.
Press the down arrow key.
Step 6
(if cells/ml selected)
Select the multiplier using the left and right arrows.
Options are 1000 or 1,000,000.
Step 7
Press OK
to enter the Results screen or
press Cancel
to cancel selections and
return to the Life Science folder.
Step 8
Insert the reference and press the
key.
This will be used for all subsequent samples until
changed.
Step 9
Insert the sample and press
.
The wavelength, absorbance and OD600 value is
displayed.
Repeat step 9 for all samples.
Press
to return to the Life Science Folder.
Press
to display available Options.
Options
(select using key pad numbers)
1.
Return to parameters screen (step 1 above).
2.
Print result via selected method.
7.
Sample number – add a prefix to the sample
number and reset the incrementing number to
the desired value.
8.
Save method – use the left and right arrows to
select a folder to store in (Favourites/Methods
1-9), press the down arrow and enter name.
9.
Auto-print – toggles auto-print on/off.
Exit options by pressing
or wait.
