Harris QSEE6800 Plus H, Инструкция по установке и эксплуатации

Страница: 67 / 86

QSEE6800
+
H Installation and Operation Manual 53
Chapter 4: CCS Operation
2. Click on the Device tab.
3. Use the Up and Down buttons to change the Global Alarm
Priority number. This determines the threshold above which
alarms are triggered for the whole node.
If an alarm on the module or input is at or above the Global Alarm
Priority, that alarm displays when it is triggered.
You can set individual alarms to active or inactive status, define their
alarm level, and in many cases define their trigger thresholds and
durations. For more information, see the following tables:
•
“Alarm Options” on page 35
• “SDI Video Alarms” on page 37
• “SDI Embedded Audio Alarms for QSEE6800
+
H” on page 39
• “Data Alarms” on page 40
Launching the QuickTime Player Outside Your
CCS Software
You may need to launch a QuickTime player independent of your CCS
Pilot or Navigator software; for example, to listen to audio. There are
two methods for launching a QuickTime player:
•
“Launching the QuickTime Player From a Graphical Navigation
Window” on page 53
• “Playing MPEG-4 Video from the Navigation Pane” on page 54
Launching the QuickTime Player From a Graphical
Navigation Window
When you launch a Quicktime player to view streaming video, you can
listen to the QSEE6800
+
H audio output, in addition to monitoring the
video. To add a button to launch streaming video, follow these steps:
1. With Navigator in Build mode, place a button on a
Graphical
Navigation page. See your Navigator User Guide for more
information.
2. Right-click on the button and select Properties... from the menu
that appears.
The
Object Properties dialog box opens.