Harris QSEE6800 Plus H, Инструкция по установке и эксплуатации

Страница: 27 / 86

QSEE6800
+
H Installation and Operation Manual 13
Chapter 2: Installation
:
Dual-Network QSEE6800
+
H Configuration
In a dual-network configuration (shown in Figure 2-4 ), low-volume
control and monitoring inputs are separate from high-volume streaming
inputs.
This configuration includes frames connected to two switches. One
switch carries streaming-related data such as MPEG-4, thumbnails and
line-sampling data, while the other switch carries control and
monitoring information.
Figure 2-4. Dual-Network Configuration
In this configuration, you can reliably monitor up to 24 QSEE6800
+
H
modules without SNMP enabled, or 20 QSEE6800
+
H modules if
SNMP is enabled.
Table 2-3. Maximum Number of QSEE6800
+
H Modules Per Configuration
Configuration Description
With SNMP Enabled Without SNMP Enabled
MPEG-4 and
Thumbnails
Thumbnails
Only
MPEG-4 and
Thumbnails
Thumbnails
Only
Low-resolution thumbnails, with
line sampling and audio disabled 18 20 22 24
High resolution thumbnails, with
line sampling and audio enabled 8 10 8 10
Note
In this configuration, the PC
running Pilot or Navigator must
have two network cards.
Com 3
Pilot / Navigator PC
Frame containing
module
Streaming inputs
from Q
modules
Control/monitoring
inputs from
module
Two network cards,
one for each input
Com 3
coax