Harris QSEE6800 Plus H, Инструкция по установке и эксплуатации

Страница: 53 / 86

QSEE6800
+
H Installation and Operation Manual 39
Chapter 3: Card-Edge and Parameter Operation
QSEE6800
+
H SDI Embedded Audio Alarms
Table 3-9 lists QSEE6800
+
H’s embedded audio alarms. These alarms
apply to audio that is embedded in either an HD or SD video stream.
Note that alarm names that contain numbers in parentheses indicate a
series of alarms that share the same description and alarm option default
settings.
Table 3-9. SDI Embedded Audio Alarms for QSEE6800
+
H
Alarm Name
Alarm
Description
Alarm Option Default Settings
Enable/
Disable Priority
Trigger
(sec)
Clear
(sec)
SDI Embedded Ch (01 to 16) peak Detects that the peak
audio level meets or
exceeds the limit set
in the
“Peak Audio
Threshold” parameter
Enabled 1 30.0 2.0
SDI Embedded Ch (01 to 16) Loss
of Sound Detects that the audio
amplitude has fallen
below the limit set in
the
“Loss of Sound
Threshold” parameter
Enabled 1 30.0 2.0
SDI Embedded Ch (01 to 16) Vbit
Set Detects a set V-Bit in
the embedded audio
source Enabled 1 1.0 2.0
SDI Embedded Ch (01 to 16) Low
Audio Detects that the peak
audio sample has
stayed below the level
set in the
“Low Audio
Threshold” parameter
Enabled 1 30.0 2.0
SDI Embedded Ch (01 to 16)
Missing Reports if the SDI
embedded audio
channel is missing Enabled 1 1.0 2.0
SDI Embedded Audio Group (1 to
4) Missing Reports that the audio
in the specified group
is not present Enabled 1 1.0 2.0