Harris QSEE6800 Plus H, Инструкция по установке и эксплуатации

Страница: 34 / 86

20 QSEE6800
+
H Installation and Operation Manual
Chapter 2: Installation
10. Double-click the device icon.
The Configuration... box opens. On the File Transfer tab, the
/frame/slotx (where x is the slot number) directory appears in the
Select the device directory to transfer to: field.
11. Click Add , and in the Add Upgrade Files box, browse, select the
module’s upgrade package, and then click OK .
12. Choose the file you wish to upgrade, and then click OK .
13. Click Perform Transfer , and then click Yes .
This may take several minutes.
14. Wait for the message File transfer to device succeeded in the
status bar.
15. Click Reboot Device , and then click Yes .
After the module has rebooted, a message box advises you to wait
until the device has rebooted.
16. Wait 30 seconds.
Your upgrade procedure is complete.
Adding a License Key for MPEG-4 Streaming
To enter a license key to activate MPEG-4 streaming, your CCS
software must be in Control mode. Follow these steps:
1. Select the QSEE6800
+
module in the Navigation pane, right click
and select Control to open the module’s Control window.
2. If it is not already selected, click on the Streaming tab.
3. Type your license key in the Key field.
If your license key is valid, the Options field will display High-End
Streaming .
Note
You must delete unwanted files
in the
Add upgrade files for
transfer to device: field before
transferring the files. Otherwise,
the upgrading procedure will
fail.
Note
Some 6800
+
modules will
reboot automatically. In these
cases, the
Reboot button will be
grayed out.
Note
For assistance with a license
key, or to purchase a license
key, please contact your sales
representative.