Harris QSEE6800 Plus H, Инструкция по установке и эксплуатации

Страница: 62 / 86

48 QSEE6800
+
H Installation and Operation Manual
Chapter 4: CCS Operation
Building a QSEE6800
+
Page Using the Wizard
A wizard helps you create a streaming page in Navigator (you can’t
make a streaming page in Pilot). Pages are built in Build mode. Follow
this procedure:
1. From the main menu, choose
File > New . The New Page wizard
opens.
2. Click on the Quality Control tab, and then double click the
Multi-Monitor View icon.
The Page Wizard (step 1 of 2) opens.
3. Click Add to open a Device Selection window.
4. Select a QSEE6800
+
module, or an input to a QSEE6800
+
module.
On the Device Selection screen, you can see all the inputs to the
module.
•
To add an individual input, choose it, and then click OK .
• To add all the inputs for a QSEE6800
+
H module, choose the
module itself, and then click OK .
You can only select one item at a time. To add another item, click
Add again.
On the Step 1 of 2 screen, you can switch the selected input for a
QSEE6800
+
module by clicking the Input field. This opens a
drop-down menu that lists All plus each of the individual inputs.
To add multiple inputs from the same QSEE6800
+
, select it
multiple times in the Device Selection window.
Each input to any particular QSEE6800
+
module can only be
selected once. If, for example, you choose a QSEE6800
+
module,
and an input to that module, you will receive an error message. You
must resolve the problem (by removing one or more inputs from the
list) before you can proceed to Step 2 of 2.
5. Click Next>> to proceed to the Step 2 of 2 screen.