Harris QSEE6800 Plus H, Инструкция по установке и эксплуатации

Страница: 26 / 86

12 QSEE6800
+
H Installation and Operation Manual
Chapter 2: Installation
Making Connections
Once you have installed the QSEE6800
+
H module, you can connect it
to the appropriate inputs and outputs. See Figure 1-2 on page 5 .
Depending on how your network is configured, its capacity for
QSEE6800
+
H modules will vary. There are two configuration options,
as described in the following sections:
•
“Single Network Q Configuration” on page 12
• “Dual-Network QSEE6800
+
H Configuration” on page 13
Single Network Q Configuration
A single-network configuration, as shown in Figure , has both control
and monitoring data, and streaming data, transmitted across the same
network and through the same Ethernet switch(es). Typical results for
this type of network configuration are shown in
Table 2-3
Figure 2-3. Single Network Configuration
Com 3
Pilot / Navigator PC
Coax
Frame containing
module
Streaming inputs
from Q
modules
Control/monitoring
inputs from
module
Single
network input