Harris QSEE6800 Plus H, Инструкция по установке и эксплуатации

Страница: 68 / 86

54 QSEE6800
+
H Installation and Operation Manual
Chapter 4: CCS Operation
3. Select the Rules tab, and then click the New Rule button.
A new line appears in the Rules table.
4. In the new rule’s Event list, select OnMouseClick .
The default Condition setting for this event is Always ; you can
leave that as it is, or you can change it by clicking the Condition
button. See your
Navigator User Guide for more information.
5. From the new rule’s Action list, select Launch Application .
6. Click the Action Properties button.
The Action Property dialog opens. Fill it in with the following
information:
Command:
c:\program
files\quicktime\quicktimeplayer.exe
(or the complete path to your QuickTime Player installation, if it
differs from the above)
Arguments:
rtsp://[IP Address]:554/streaming
(replace [IP Address] by the IP address of the QSEE6800
+
H
module)
You can leave the
Initial Directory field blank.
7. Click OK to close the Action Properties dialog box. Close the
Object Properties window by clicking the X in the top right
corner.
When you enter Control mode, the new button will open a QuickTime
Player and play streaming video from the selected source.
Playing MPEG-4 Video from the Navigation Pane
To stream MPEG-4 video out of your QSEE6800
+
H module, you must
have the QSEE6800
+
HS option. When monitoring an MPEG-4 stream
from QSEE6800
+
H by launching a QuickTime player, you can hear
monitoring audio in addition to viewing the video stream.
To add a device icon to launch streaming video from the Navigation
pane, follow these steps:
1. With Pilot or Navigator in Build mode, under the
Network ,
Discovery , or Temporary folder of the Navigation window,
right-click and select Create > Server .
This will create a Server icon in the Navigation window.
Note
Navigator is compatible with
QuickTime version 7.1.
Note
Pilot and Navigator are
compatible with QuickTime
version 7.0.4.