Chapter 7 Device Configuring Using EMS
Physical Input Ports and Slots
© 2012 Harmonic Inc.
86
ProView 7000 v.2.6, Rev. E
7.1.4.2
CAM Slot Properties
Use the CAM Slot properties dialog to monitor and manage individual CAM slots.
To display the properties dialog for a CAM slot:
1. Select a CAM slot in the
Physical Input
box on the
Device Explorer
tab.
2. Click
Properties
on the EMS toolbar.
Figure 7–7: CAM Slot Properties dialog
The CAM Slot Properties dialog includes the following:
■
Mapped to Input Multiplex Port
– Displays the current association status of the CAM slot
and enables you to re-associate the CAM slot to an available multiplex input. You can only
re-associate the CAM when no services are configured for the CAM.
■
CAM Vendor Card
– Provides the following information for the CAM card in the slot:
❑
Vendor name
❑
Number of descrambled programs
❑
Number of descrambled elementary streams
■
Descrambled Programs
– Displays the program PIDs descrambled by the CAM.
■
CAM Automatic Recovery Policy
– You can configure the ProView 7000™ to reset the CAM
when one of the following alarms is raised:
❑
CAM Descrambling Failure
– Enabled by default.
❑
CAM Processing Failure
– Enabled by default.
❑
Packet Loss after CAM
– Disabled by default.
■
Advanced
❑
CAM De-Jittering – Enable or disable.
