Chapter 2 Quick Start
Configuring and Monitoring
© 2012 Harmonic Inc.
22
ProView 7000 v.2.6, Rev. E
To configure the ProView 7000™ using the Front Panel:
1. If the input stream is received from a satellite, navigate
Root > Reception > SAT (no.) > Configuration
and configure the receiver parameters
according to your satellite parameters, see
4.1 Configuring the DVB-S/S2 Input Port
for details.
2. If the input stream is received from IP, perform the following to configure the GbE port:
a
Navigate
Root > GbE > GbE Port (1 or 2) > IP Configuration.
b
Configure the IP Address and Subnet Mask.
c
Select
Apply Port Changes
.
d
Select
Apply Changes
.
e
Navigate
Root > GbE > GbE Port (1 or 2) > Admin Status
.
f
Set the Admin Status to
Up
.
g
Navigate
Root > GbE > Socket Configuration > Socket In > Socket (no.) >
Traffic Parameters
.
h
Configure the IP Address Type, UDP Port and IP Address if you are using Multicast.
i
Navigate
Root > GbE > Socket Configuration > Socket In > Socket (no.)
.
j
Configure the Socket De-Jittering Mode, SSM and Socket Admin Status.
3. If the output stream is sent to IP, perform the following to configure the GbE port:
a
Navigate
Root > GbE > GbE Port (1 or 2) > IP Configuration.
b
Configure the IP Address, Subnet Mask and Default Gateway.
c
Select
Apply Port Changes
.
d
Select
Apply Changes
.
e
Navigate
Root > GbE > GbE Port (1 or 2) > Admin Status
.
f
Set the Admin Status to
Up
.
g
Navigate
Root > GbE > Socket Configuration > Socket Out > Socket (no.)
.
h
Configure the Destination IP Address and the Destination UDP Port.
i
Set the Socket Status to
Up
.
4. If you wish to descramble, you must associate the CAM to the multiplex:
a
Navigate
Root > CAM > CAM (1–4) > CAM Association
.
b
Select a multiplex, TS1, TS2, TS3 or TS4.
The descrambling mode default is
Selective
, you can change the mode to
Full
.
5. To access the CAM MMI menu, select
CAM MMI
.
6. Select a DVB-S/S2 input port:
a
Navigate
Root > Routing and Descrambling > TS (no.) > Input Selection
.
b
Select an input port for the received transport stream (Options: SAT (1–4), ASI (1–4)).
7. Select
Input Type
, (Options: MPEG and DVB). This also sets the respective PSI/SI tables for
the output stream.
NOTE:
The default option for stream type is DVB. For ATSC systems, set the stream type to MPEG.
