Chapter 7 Device Configuring Using EMS
Multiplex & Decoding Outputs
© 2012 Harmonic Inc.
113
ProView 7000 v.2.6, Rev. E
7.3.8.1
Service Parameters Tab
The Service parameters tab provides the EMS user the following information and set-up
capabilities:
■
Source box
– displays the stream input source and input program name for the decoder.
❑
Service Selection Mode
drop-down menu options:
•
Automatic
– Use this mode for ProView 7000™ to automatically decode the first
program in the TS (first PMT)
•
Program
– Use this mode to set the decoder to manual program selection
•
PID
– Use this mode to set the decoder to manual PID selection
•
No Decoding
– Use this mode to disable decoding
❑
PID Selection box
– Displays the PID for the program PCR and to select the elementary
stream PID for the Video and the VBI/VANC processing. It also enables the user to set
the ES PID and preferred language for each one of the two audio streams (Audio1 and
Audio2).
❑
Channel Descrambling box
•
Descramble with
– Use this feature to enable stream descrambling and to select a
CAM
•
Program Status
– Shows whether the program is being descrambled and by which
CAM slot.
Figure 7–15: Decoding Channel Properties – Service tab
