Chapter 7 Device Configuring Using EMS
Device Properties
© 2012 Harmonic Inc.
161
ProView 7000 v.2.6, Rev. E
Figure 7–43: Device Properties dialog – Communications tab
To configure the trap destination:
1. Right-click the requested device and select
Properties
on the context menu.
The Device Properties dialog displays.
2. Select the
Communications
tab.
3. On the Communications tab, click
Add…
.
The Trap Destination / Add dialog displays.
4. Fill the following fields in the Trap Destination – Add dialog.
❑
IP Address
– Sets the IP address of the trap destination
❑
UDP Port
– Sets the UDP port number of the trap destination
❑
Description
– Optional parameter, describing the trap destination
❑
Trap Community
– Set the trap community
5. Click
OK
.
6. Click
Apply
.
