Chapter 4 Device Configuring Using the Front Panel
Unit Menu
© 2012 Harmonic Inc.
56
ProView 7000 v.2.6, Rev. E
4.6.4
Date/Time Menu
You can view or configure the current date and time using the front panel or the unit can
synchronize its clock with an NTP server using SNTP/NTP v2 or v3.
The Date/Time menu comprises:
■
Date
■
Time
■
NTP
NTP is disabled by default.
4.6.5
Set Active Version
The ProView 7000™ keeps the current and last software versions. The EMS enables you to
choose the active software version. The process of changing the active software version takes
several minutes and requires a reboot.
To change the device software version:
1. Navigate
Root > Unit Set Active Version
.
2. Select the second version and press
Enter
.
3. Press
Enter
.
4.6.6
License
Use this menu to display the ProView 7000™ licenses.
4.6.7
BOOTP Menu
Use to enable BOOTP software to update the unit.
4.6.8
LCD Contrast Menu
Use to set the front panel LCD contrast. You can use the up and down arrow buttons or enter
a value (ProView 7100™). Valid range is 01 – 31, where 1 is lowest and 31 is highest contrast.
4.6.9
GPI Menu
Use the GPI menu to configure alarms to toggle GPI relays for any automation system on-site
or to manually switch relays. It comprises the following sub-menus:
■
Mode – there are three modes for each GPI relay, namely:
❑
On – Use this mode to manually switch the relay on.
❑
Off – Use this mode to manually switch the relay off, this is the default.
❑
Alarms – Use this mode to select individual alarms to toggle the relay.
■
Alarm Triggers – List of alarms to enable for the Alarms mode.
4.6.10
Reset Unit Menu
Use to perform a warm reset on the ProView 7000™.
Selecting the Reset Device option, starts a three step procedure which, when completed,
reboots the device.
