Chapter 4 Device Configuring Using the Front Panel
Unit Menu
© 2012 Harmonic Inc.
54
ProView 7000 v.2.6, Rev. E
4.5.5
Configuring Only Relevant Elementary Streams
The descrambling mode default is
Selective
.
To set the CAM to Selective mode to configure only relevant elementary streams:
1. Navigate
Root > CA Definitions > CAM (1–4) > Descrambling Mode
.
2. Select
Full
.
4.5.6
Accessing the CAM MMI Menu
To access the CAM MMI menu:
❖
Navigate
Root > CA Definitions > CAM (1–4) > CAM MMI
.
4.6 Unit
Menu
Use the following Unit menu items to configure and monitor ProView 7000™s:
■
■
■
■
■
■
■
■
■
■
■
4.6.1
Management Port Menu
Use the Management Port menu to configure the management port.
To access the Management Port menu:
❖
Navigate
Root > Unit > Management Port
.
Each option in the menu leads to value setup screen (i.e., selecting the option displays either
an edit value screen - to set a new value or a select value screen with radio button options).
The Management Port configuration menu provides the following options:
■
IP Configuration
– manages the IP configuration of the GbE port. The sub-menu manages
the following parameters:
❑
IP Address
– sets the IP address of the port.
❑
Subnet mask
– sets the network subnet mask address for the port.
❑
Default Gateway
– sets the network default gateway address. This is the address of a
local IP router on the same network as the ProView 7000™, which is used to forward
traffic beyond the local network.
■
MAC Address
– displays the media access control (MAC) address for the device.
