Chapter 7 Device Configuring Using EMS
Multiplex & Decoding Outputs
© 2012 Harmonic Inc.
100
ProView 7000 v.2.6, Rev. E
7.3.1.1
Multiplexing an Input Program
To multiplex an input program to the output stream:
1. Select the
Add Other Program…
option in the context menu.
The Add Another Program dialog displays.
2. Select the multiplex input port and the program number to multiplex to the output.
7.3.1.2
Multiplexing an Input PID
To multiplex an input PID (either an unreferenced one or a PID from a defined program) to the
output stream:
1. Select the
Add Unreferenced PID…
option in the context menu.
The Add Unreferenced PID dialog displays.
2. Select the multiplex input port and the PID number to multiplex to the output.
TIP:
Multiplexing a Program or a PID can be also done by dragging the program icon or the PID icon from
the multiplex input tree and dropping it in the multiplex output tree. For detailed instructions
7.6.1 Setting Multiplex Cross Connections
.
Remove Selected
Removes the selected element.
Remove All
Removes all output programs or all output unreferenced PID from the
multiplex output.
Refresh Port Multiplex Out
Updates the Port Multiplex Out.
Properties
Displays the marked element properties dialog. For details, see
7.3 Multiplex & Decoding Outputs
Table 7–1: Multiplex Output Context Menu
