background image

 © 2012 Harmonic Inc.

32

ProView 7000 v.2.6, Rev. E

Chapter 3

Front Panel Overview

The front panel of the ProView 7000™ multifunctional receiver platform provides a managing 
interface for local monitoring and configuring the operation of the ProView 7000™ unit. This 
chapter describes the operation of the front panel interface.

Topics:

Main Elements and Structure

Front Panel Display

3.1 

Main Elements and Structure

The ProView 7100™ and ProView 7000™ front panels display information regarding the input 
streams and output streams and to perform basic operations. Figure 3–2 and Figure 3–1 
illustrate the front panels.

Figure 3–1: ProView 7100™ front panel

Figure 3–2: ProView 7000™ front panel

Alpha-Graphic LCD

ESC and ENTER

control keys

WARNING, PWR/FAIL 

LEDs

Four direction

touch-pads

DVB-CI

Alphanumeric 

keypad

Function keys

 

Alpha-Graphic LCD

ESC and ENTER

control keys

Function keys

WARNING, PWR/FAIL 

LEDs

Four direction

touch-pads

DVB-CI

Содержание ProView 7000



























































































































































































































Отзывы: