Harman Martin Exterior Projection 1000 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 60

background image

Exterior Projection 1000 User Manual

5

Safety information

WARNING!

Read the safety precautions in this manual before installing, operating or

servicing this product.

The following symbols are used to identify important safety information on the product and in this
manual:

The following symbols are used to identify important safety information on the product
and in this manual:

Warning! Safety hazard.
Risk of severe injury or
death.

Warning! Hot surface. Risk
of burns.

Warning! See user manual
for important safety
information.

Warning! Risk of eye
injury. Wear protective
eyewear.

Warning! Hazardous
voltage. Risk of lethal or
severe electric shock.

Warning! Do not look into
light output.

Warning! Fire hazard.

Warning!

Risk Group 2 product according to EN 62471. Do not look directly into the

beam. Do not view the light output with optical instruments or any device that may
concentrate the beam.

This lighting fixture is for professional use only and must be installed by a qualified
technician. It is not for household use. It presents risks of severe injury or death due to
fire hazards, electric shock and falls. It produces a powerful, concentrated beam of light
that can create a fire hazard or a risk of eye injury if the safety precautions below are not
followed.

Respect all locally applicable laws, codes and regulations when installing, operating or
servicing the fixture.

The latest software, manuals and other documentation for all Martin products are
available for download at www.martin.com

The light source contained in the fixture may be replaced by Martin or an authorized
Martin service agent only.

A terminal block for connection to AC mains power is not included and must be supplied
by the installer.

Technical Support

If you have any questions about how to install, operate or service the fixture safely,
please contact your Martin® distributor. For technical support in North America, please
contact Harman Professional Technical Support by e-mail:
[email protected] or by phone: (844) 776-4899. For technical
support outside North America, please contact your national distributor.

«
...
3
4
5
6
7
...
»

Содержание Martin Exterior Projection 1000





























































Отзывы:

Нет отзывов

Похожие инструкции для Martin Exterior Projection 1000

Бренд: Goobay Страницы: 6

Бренд: Raytec Страницы: 10

EPL-LED-150W-RT-20-HDBC

Бренд: Larson Electronics Страницы: 2

GEO-FL-100W-IP65-007

Бренд: GEO-Industries Nederland Страницы: 7

Бренд: PR Lighting Страницы: 26

Бренд: Eagle Страницы: 8

Calculite C7P38MHL

Бренд: Lightolier Страницы: 2

Бренд: Pablo Страницы: 4

HALP-48-2L-LED-DNMS

Бренд: Larson Electronics Страницы: 2

Бренд: Hamron Страницы: 11

Бренд: ACME Страницы: 6

Бренд: Edwards Страницы: 4

EPL-BS-150HPS Series

Бренд: Larson Electronics Страницы: 2

Бренд: Beghelli Страницы: 2

LED PAR 38 TRI-B

Бренд: Chauvet Страницы: 20

Бренд: Certikin Страницы: 6

Prismalyte Plus PRA1GRFVA232

Бренд: Lightolier Страницы: 2

Бренд: TI Страницы: 1

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды