Harman Martin Exterior Projection 1000, Руководство пользователя

Страница: 41 / 60

Exterior Projection 1000 User Manual 41
2. Hold the goboholder up to the rotating gobo wheel in its original position. Rotate it until the
alignment mark in the goboholder lines up with the reference point as shown in Step 3.
3. See illustrations below. Push the goboholder into position, sliding the tongue that sticks out
from the goboholder into position (arrowed) behind the gobo activation cog, pressing against
the gobowheel.
4. Check that the goboholder is held securely. Rotate the whole gobowheel with your finger and
check that the goboholder rotates in the wheel while you rotate the gobowheel. If the
goboholder does not rotate, it is not correctly installed and its teeth are probably not engaged
correctly in the teeth in the gobowheel. Lift the goboholder out of the gobowheel and reinstall it
correctly.
5. Reinstall the top cover as described earlier in this chapter.