Harman Martin Exterior Projection 1000, Руководство пользователя

Страница: 34 / 60

34 Exterior Projection 1000 User Manual
Service and maintenance
Read ‘Safety information’ on page 5 before servicing the fixture.
Important! Opening the fixture can allow moisture to enter and cause condensation on the
front glass. Read ‘Managing humidity’ below and follow the guidelines in this user manual
carefully.
Refer any service or repair operation not described in this manual to an authorized Martin service
technician. Do not try to carry out such an operation yourself, as doing so may present a health or
safety risk. It may also cause damage or malfunction, and it may void your product warranty.
Installation, on-site service and maintenance can be provided worldwide by the Martin Global
Service organization and its approved agents, giving owners access to Martin’s expertise and
product knowledge in a partnership that will ensure the highest level of performance throughout
the product’s lifetime. Please contact your Martin supplier for details.
Optical components have fragile coatings and are exposed to very high temperatures. Handle and
store components with care. Wear cotton gloves while handling them. Keep them perfectly clean
and free of oil and grease to reduce the risk of heat damage.
Firmware
The Exterior Projection 1000 accepts firmware (fixture software) updates via the DMX/RDM link if
you use an uploader tool such as the Martin Companion application running on a Windows PC.
Connect the PC to the DMX/RDM link via a suitable USB-to-DMX hardware interface such as the
Martin Companion Cable, P/N 91616091. See the Martin website at www.martin.com for details of
the firmware upload options available.
The information given in this user manual covers firmware version 1.7.0. If a fixture is running an
earlier version of the firmware, the fixture may not behave exactly as described in this user
manual. Bear in mind also that, if we release a new version of the firmware in the future, the later
firmware may not contain any changes that require an update to this user manual.
The latest firmware for all Martin products, with details of changes between firmware versions, is
available on the Martin website at www.martin.com. The Martin website also gives details of
recommended firmware upload tools. Your Martin supplier will be glad to help if you wish to upload
firmware to a Martin product and need assistance.
Cleaning
Regular cleaning is essential for fixture life and performance. Buildup of dust and dirt degrades the
fixture’s light output and cooling ability.
Cleaning schedules will vary greatly depending on the operating environment. It is therefore
impossible to specify precise cleaning intervals for the Exterior Projection 1000. Inspect fixtures
within their first few weeks of operation to see whether cleaning is necessary. Check again at
frequent intervals. This procedure will allow you to assess cleaning requirements in your particular
situation. If in doubt, consult your Martin dealer about a suitable maintenance schedule.
Do not use products that contain solvents, abrasives or caustic agents for cleaning, as they can
cause surface damage to the fixture. The aluminum housing and front glass can be cleaned with
mild detergents such as those for washing cars.
To clean the housing and front glass:
1. Isolate the fixture from AC power and allow the fixture to cool for 20 minutes.
2. Visually check that the silicone seals and the power and data cables are in good condition. If
any seal or cable shows signs of damage, cracking or loss of water resistance, stop cleaning
the fixture and contact a Martin authorized service technician for replacement.
3. If seals are in good condition, rinse off loose dirt with a hose or low-pressure water spray.