manualshive.com logo in svg

Harman Martin Exterior Projection 1000, Руководство пользователя, Страница: 53 / 60

Поделиться
Скачать
Harman Martin Exterior Projection 1000 Скачать руководство пользователя страница 53

 

 

Exterior Projection 1000 User Manual 

53 

Control and Programming   

Control options ........................................................................................ DMX, RDM, stand-alone 
Configuration, addressing and status ........ Onboard control panel with OLED display or via RDM 
8-bit control ..................................... CMY, color selection, gobo selection, prism, frost, animation 
16-bit control ............................................. Gobo indexing and rotation, zoom, focus and intensity 
DMX channels ............................................................................................................................ 20 
DMX compliance .............................................................................................   USITT DMX512-A 
RDM compliance .............................................................................................   ANSI/ESTA E1.20 

Optics   

Light source ..................................................................................... 440 W white light LED engine 
CRI (Color Rendering Index) ...................................................................................................... 72 
Color temperature ................................................................................................ 6500 K (±250 K) 
LED lifetime .................................................................. 20 000 hours (to >70% luminous output)* 
LED manufacturer ....................................................................................................... Appotronics 

*Figure obtained under manufacturer's test conditions   

Photometric Data   

Cut-off angle ..................................................................................................................... 10° - 44° 
 
Luminous intensity: 

Zoom angle 

Total output

Center peak

10° 

11 500 lumens

731 000 cd

16° 

15 000 lumens

311 000 cd

40° 

16 800 lumens

42 000 cd

 
 

Construction   

 

Housing .................................................................................................................. Cast aluminum 
Finish .................................................................. Hard-anodized, white or metallic grey lacquered 
Front glass .................................................... 5 mm (0.2 in.) anti-reflection coated tempered glass 
Ingress protection ................................................................................................................... IP 66 
Impact resistance ..................................... IK08 (with control panel / display cover plate installed) 
Corrosion resistance ......................................... C5-M (very high corrosivity / marine, ISO 12944) 
EPA (Effective Projected Area ............................................................................................ 0.28m

2

 

RoHS compliant 

Gobos 

Suitable material ................ Metal or borosilicate glass, coatings heat-resistant to 450°C (842° F) 
Gobo diameter .............................................................. 30.0 mm +0/-0.3 mm (1.2 in. +0/-0.02 in.) 
Maximum image diameter .................................................................................... 26 mm (1.02 in.) 
Gobo thickness, minimum ...................................................... 1.1 mm ±0.1 mm (0.045 ±0.004 in.) 
Gobo thickness, maximum .............................................. 3.0 mm ±0.3 mm (0.118 in. ± 0.012 in.)* 

*Gobos thicker than 2.5 mm require a shorter spring in the goboholder 

Installation 

Mounting ................................................................................................................ Adjustable yoke 
Suitable for wet locations. Do not immerse in water. 
Orientation .................................................................................. Any (sides must be kept vertical) 
Minimum distance to illuminated surfaces ................................................................ 0.5 m (20 in.) 

Содержание Martin Exterior Projection 1000





























































Отзывы:

Нет отзывов