Harman Martin Exterior Projection 1000, Руководство пользователя, Страница: 38 / 60

38 Exterior Projection 1000 User Manual
Replacing a rotating gobo
Gobos are user-replaceable, and you can replace them with custom gobos made to your own
design.
Gobos 1 – 4 and gobo 7 are printed/coated glass and share the same specifications, but gobos 5
and 6 are textured glass and have different specifications to the others. See ‘Gobos’ on page35.
When replacing the textured glass gobos in goboholder 5 and 6 with standard glass gobos, you
must use the long spring.
See illustration below. The goboholders have magnets (arrowed) that the fixture uses to recognize
the position of the gobo wheel and gobos. If you replace gobos, install gobos and goboholders in
their original orientation, using the magnet as reference.
The rotating gobos in the Exterior Projection 1000 are installed in goboholders that clip into the
rotating gobo wheel.
Keep gobos perfectly clean and free of oil and grease from your fingers. Put on clean, lint-free
gloves while handling gobos.
To replace a gobo:
1. Remove the top cover as described under ‘Removing and reinstalling the top cover’ earlier in
this chapter.