Hardi MUSTANG 3500 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 68

background image

HARDI

®

MUSTANG 3500 OPERATOR’S MANUAL

FLASH PROGRAM MEMORY

The HARDI

®

MUSTANG 3500 program resides in flash memory,

allowing simple field upgrades to the software, using the provided
software utilities and downloadable files, as more features are
developed and added.

RS-232 SERIAL INTERFACE

The HARDI

®

MUSTANG 3500 serial interface allows the HARDI

®

MUSTANG 3500 to be linked to most desktop, laptop or pocket PC
computers. This serial link can be used to calibrate or reprogram the
console using the provided software utilities package. It can also be
used with appropriate software such as Farm Works

®

SiteMate to

accomplish variable rate application (VRA), or or be used as a data
logger. See Appendix C in back of manual. Using the HARDI

®

printer,

data can be printed directly from the RS-232 output to the printer.

SOFTWARE UTILITIES

A compact disc with Utility Software is provided with each system. If
you have access to a PC with CD drive, this software can be easily
loaded on the PC or pocket PC. The Utility Software includes a
calibration “wizard” that directs the operator through the MUSTANG
calibration process and automatically sets up calibration for various
types of systems. If the PC is connected to the MUSTANG, the
calibration parameters can be downloaded directly to the MUSTANG,
or the calibration settings can be printed out and entered into the
MUSTANG manually. The calibration settings can be stored as files so
the MUSTANG can be quickly reconfigured if it is used with different
applicators. If the PC is connected to the MUSTANG, the Utility
Software also provides the ability to reprogram the MUSTANG with
program upgrade files provided by HARDI

®

via e-mail (or on floppy

disk).

4

«
...
5
6
7
8
9
...
»

Содержание MUSTANG 3500





































































Отзывы:

Нет отзывов

Похожие инструкции для MUSTANG 3500

Бренд: WAGNER Страницы: 64

Бренд: CORNING Страницы: 15

Бренд: Qomolangma Страницы: 17

Бренд: Solo Страницы: 10

Бренд: Solo Страницы: 3

Бренд: Cima Страницы: 42

Бренд: Dynalabs Страницы: 13

DANDY-LION KILLER

Бренд: F/S Manufacturing Страницы: 2

Бренд: Electron Страницы: 17

Бренд: Performance Tool Страницы: 6

H.V.L.P. Spray Gun

Бренд: Performance Tool Страницы: 6

Бренд: Nupower Страницы: 10

Бренд: MVP Страницы: 46

Бренд: Parkside Страницы: 62

Бренд: ITW Dynatec Страницы: 114

Бренд: ITW Gema Страницы: 41

Бренд: Echo Страницы: 8

PILOT WA 960 AR

Бренд: WALTHER PILOT Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды