Happy HCS2-1201-30, Руководство по обслуживанию

Страница: 32 / 196

33
5. Remove jump solenoid ass’y.
6. Install good parts.
Set upper shaft to [ 80 degrees ] to adjust position of plunger
of jump solenoid and jump body as illustrated below.
<Front view>
Viewing from front, jump body should come to center of
Plunger.
Plunger
Jump solenoid ass’y
Jump body
<View from left>
This shows a state that plunger and jump body contacts.
Plunger Jump body
7. Adjust upper shaft to be [ 180 degrees ] and tip of the body
has to be same as the picture below.
8. Please put parts back in reverse order to finish.
For adjustment of fixing of each unit, please refer to
process to adjust fixing of each unit.
90 degrees
Front side